Food Preservation and Storage Engineering
NFE · Midterm · Spring 26
Section 241 All
Read the questions as text
Read off the PDF by AI, so it may have mistakes. The PDF is the original.
Daffodil International University
Department of Nutrition and Food Engineering
Faculty of Health and Life Sciences
BSc. in Nutrition and Food Engineering
Midterm Examination Spring 2026
Course Code: 0721-3111
Course Title: Food Preservation and Storage Engineering
Level and Term: L-3, T-2
Section: 241 All
Course Teacher Initials: MMM/MNR/MSI
Time: 1 hour 30 minutes
Total Marks: 25
Maintaining the order of the questions is highly appreciated
1. a) What do mean by food preservation? [CLO1,PLO1,C1] 1
b) Explain the concept of a moisture sorption isotherm and describe its significance in food preservation. [CLO1,PLO1,C2] 2
c) Convert the following moisture content, [CLO1,PLO1,C2] 2
i) 78% wet basis to dry basis & ii) 30% dry basis to wet basis.
2. a) Construct a drying curve and assess how each drying stage affects the efficiency of a drying process. [CLO1,PLO1,C5] 2
b) Apple juice is being concentrated in a natural-circulation single-effect evaporator. At steady-state conditions, dilute juice is the feed introduced at a rate of 0.67 kg/s. The concentration of the dilute juice is 11% total solids. The juice is concentrated to 75% total solids. Calculate the rate of production of juice concentrate and how much water should evaporate? [CLO1,PLO1,C5] 3
3. a) Construct a freezing diagram for water and a food material. [CLO1,PLO1,C3] 2
b) A spherical food product is being frozen in an air-blast freezer. The initial product temperature is 15 degrees C and the cold air -35 degrees C. The product has 5 cm diameter with density of 1000 kg/m^3 the initial freezing temperature is -2.15 degrees C the thermal conductivity of the frozen product is 1.2 W/mK and the latent heat of fusion is 250 kJ/kg. If the convective heat transfer coefficient is 45 W/m^2K, estimate the freezing time. [CLO1,PLO1,C3] 3
4. a) Define water activity with an equation. [CLO1,PLO1,C2] 1
b) Onions with 85% moisture content on wet basis is dried to a final moisture content of 10%. If we dry 200kg of onions, what is the final weight of the product and how much water is removed? [CLO1,PLO1,C4] 2
c) List the advantages of supercritical fluid (SCF) extraction. [CLO1,PLO1,C1] 2
5. a) Draw a typical figure of single screw extruder. [CLO2,PLO1,C1] 2
b) Analyze the effect of extrusion on the physicochemical properties of food products. [CLO2,PLO1,C4] 3