Textile Physics
TE · Midterm · Summer 26
Read the questions as text
Read off the PDF by AI, so it may have mistakes. The PDF is the original.
Daffodil International University
Department of Textile Engineering
Faculty of Engineering
Mid-term Examination, Semester: Summer-2026
Course Code: 0723-221 | Course Title: Textile Physics
Level & Term: L3T1 | Section: F1, F2, F3
Name & Designation of the Course Teacher: Arnob Chowdhury Mithun, Lecturer
Time: 1.5 hours. | Total Marks: 25
Answer all the questions:
01. State the laws of friction. Briefly explain the factors that affect the frictional behavior of textile fibers. [CO-1, PO-1, C-2] | 05
02. Define the following terms:
(a) Flexural rigidity | 03
(b) Bending modulus
(c) Specific torsional rigidity
[CO-1, PO-1, C-2]
03. Draw a typical load-elongation (stress-strain) curve of a textile fibre and indicate the yield point, breaking point, and the region representing work of rupture. [CO-1, PO-1, C-2] | 03
04. A fibre has a shape factor n = 0.8, specific modulus E = 6 N/tex, and density p = 1.5 g/cm^3. If the linear density increases from 1.0 tex to 2.0 tex, calculate the new flexural rigidity and comment on the effect of yarn fineness on bending behaviour. [CO-2, PO-2, C-3] | 05
05. (a) Distinguish between volume swelling (Sv) and diameter swelling (SD) and derive the relationship between them for a fibre that swells isotropically. [CO-2, PO-2, C-3] | 05+03
(b) Based on the typical thermal-conductivity values of textile fibres, analyse and justify which fibre type (natural or synthetic) is more suitable for manufacturing winter garments. Support your answer by comparing at least two natural and two synthetic fibres. [CO-3, PO-2, C-4]
Fibre | Thermal Conductivity (mW m^-1 K^-1)
Cotton | 71
Wool | 54
Silk | 50
PVC | 160
Cellulose acetate | 230
Nylon | 250
Polyester | 140
Polyethylene | 340
Polypropylene | 120