Skip to content

Energy Conversion II

EEE · Final · Spring 26

Section A · Batch 251

This browser can’t show the PDF here

Open it, and your phone’s PDF viewer takes it, or download it.

Read the questions as text

Read off the PDF by AI, so it may have mistakes. The PDF is the original.

Daffodil International University Department of Electrical and Electronic Engineering Faculty of Engineering Final Examination, Spring - 2026 Course Code: 0713-223 Section: A, B, C, D, E Full Marks: 40 Course Title: Energy Conversion II Level-Term: L2-T2 Exam Date: May 02, 2026 Teacher's Initial: MR, TA Time: 2 Hours Notes: Answer all the questions below. The second right most column indicates the course outcomes [COs] with respective Bloom's level and the right most column indicates the allocated marks. Q1. With suitable phasor diagrams, explain the underexcited and overexcited synchronous motor. | CO-1 | 5 C(2) Q2. Briefly describe the followings with necessary curve for series DC motor, | CO-1 | 5 (i) Torque versus Armature Current Characteristic | C(2) (ii) Speed versus Torque Characteristic Q3. Analyze how variations in field current affect the operation of a synchronous motor, and justify your analysis using an appropriate phasor diagram. | CO-2 | 5 C(4) Q4. Analyze the commutation process in a DC generator with necessary illustrative diagrams. | CO-2 | 5 C(4) Q5. A 220-V compound generator is supplying a load of 100 A at 220 V. The resistances of its armature, shunt and series windings are 0.1 ohm, 50 ohm and 0.06 ohm respectively. Evaluate the induced e.m.f. and the armature current when the machine is connected (i) short shunt (ii) long shunt (iii) how will the series amp-turns be changed in long shunt if a divertor of 0.14 ohm is connected in parallel with the series windings? Neglect armature reaction and brush contact drop. | CO-3 | 5 C(5) Q6. A 4-pole, 250 V d.c. series motor takes 20 A and runs at 900 r.p.m. Each field coil has resistance of 0.025 ohm and the resistance of the armature is 0.1 ohm. Determine the speed that run the motor by developing the same torque if: (i) rearranging the field coils in two series and parallel groups Assume unsaturated magnetic operation. | CO-3 | 5 C(5) Q7. A d.c. shunt machine generates 250-V on open circuit at 1000 r.p.m. Effective armature resistance is 0.5 ohm, field resistance is 250 ohm, input to machine running as a motor on no load is 4 A at 250 V. Calculate speed of machine as a motor taking 40 A at 250 V. Armature reaction weakens field by 4%. | CO-3 | 5 C(5) Q8. A 75-kW, 3-phi, Y-connected, 50-Hz, 440-V cylindrical rotor synchronous motor operates at rated condition with 0.8 p.f. leading. The motor efficiency excluding field and stator losses is 95% and X_s = 2.5 ohm. Evaluate: i. mechanical power developed ii. armature current iii. back e.m.f. iv. power angle v. pull-out torque of the motor | CO-3 | 5 C(5)