Electronic Devices and Circuits
CIS · Final · Fall 24
Read the questions as text
Read off the PDF by AI, so it may have mistakes. The PDF is the original.
Daffodil International University
Faculty of Science & Information Technology
Department of Computing and Information System
Final Examination, Fall-2024
Course Code: IoT325, Course Title: Electronic Devices and Circuits
Level: 3 Term: 1
Exam Duration: 2 Hours
Marks: 40
Answer ALL Questions
[The figures in the right margin indicate the full marks and corresponding course outcomes. All portions of each question must be answered sequentially.]
1. (a) As a student of CIS, why do you study Electronic Devices and Circuits (EDC)? Give a proper explanation. [3]
(b) What are the differences between Active and Passive components in electrical circuits? Briefly explain. [3]
(c) How many branches, nodes, junctions, and meshes are there in the circuit shown in Figure 01? [4]
[Figure: Combination Circuit showing a DC voltage source of 50V connected to a network of resistors with values 10 ohm, 27 ohm, 8 ohm, etc.]
2. (a) Mr. Habib, a student of the CIS department, lives in Mirpur 11, Dhaka, with his family. He noticed that in their house, 3 bulbs of 30 watts each are used for 5 hours per day, a fridge of 600 watts runs for 24 hours per day, 4 tube lights of 50 watts each are used for 8 hours per day, and a washing machine of 400 watts is used for 90 minutes per day.
Calculate the electric bill for the month of 31 days using the following residential rate schedule:
> First 50 kWh per month at 16 Tk/kWh.
> Next 100 kWh per month at 10 Tk/kWh.
> Over 150 kWh per month at 6 Tk/kWh. [5]
(b) State the Ohm's Law. Compare Thevenin's Theorem with Norton's Theorem in the context of electrical circuit. [5]
3. (a) Determine the resistance between the terminals A and B of the network. [5]
[Figure: Electrical Circuit showing a resistor network with 10 ohm, 20 ohm, 5 ohm, etc. connected between terminals A and B]
(b) Find Rab for the circuit in Figure 03. [5]
[Figure: Electrical Circuit showing a bridge-like resistor network with 16 ohm, 18 ohm, 9 ohm, 20 ohm, 5 ohm, 2 ohm, 28 ohm, and a dependent voltage source vx]
(c) Find v and i in the circuit of Figure 04. [5]
[Figure: Electrical Circuit showing a 14V source, 4 ohm resistor, 3 ohm resistor, 6V source, 2 ohm resistor, 1A current source, and a 6 ohm resistor]
(d) Find vx and v0 in the circuit shown in Figure 05. Also calculate i1 and i2 and the power dissipated in the 12-ohm and 40-ohm resistors. [5]
[Figure: Electrical Circuit showing a 30V source, 12 ohm resistor, 6 ohm resistor, 10 ohm resistor, 40 ohm resistor, and currents i1, i2]