Skip to content

Yarn Manufacturing II

TE · Midterm · Summer 26

This browser can’t show the PDF here

Open it, and your phone’s PDF viewer takes it, or download it.

Read the questions as text

Read off the PDF by AI, so it may have mistakes. The PDF is the original.

Daffodil International University Faculty of Engineering Department of Textile Engineering Program: B.Sc. in Textile Engineering Midterm Examination, Semester: Summer-2026 Course Code: 0723-225 Course Title: Yarn Manufacturing-II Credit Hours: 3.0 Total Marks: 25 Time: 1.5 hours. Name & Designation of the Examiner: Md. Mashud Raihan (MR), Assistant Professor Date and Time of the exam: 27.12.2026, 2:00 PM [All questions in a set must be answered together] Set-A 1. Answer any Four (4) of the following Five (a to e) [CO-1, PO-1, C/L-2] 4x4= 16 a) Explain the technical data and recent developments of Super Lap Former. b) Briefly describe the faults and causes of comber machine and finally mention three major points to overcome these faults. c) Explain why required number of machine passage is used between carding and comber. d) Illustrate a timing diagram with respect to the index wheel in the combing machine. e) Explain an appropriate measurement of adjusting noil percentage and explain with a necessary diagram. Set-B Answer all the questions [CO-2, PO-2, C/L-3] 4.5x2=9 a) Find out the total number of comber machines for 5 tons per day whose parameters are given: feed/nip=5.6mm, nip/min=380, sliver weight- 70 grain/yard, lap weight=1120grain/yds, no. of doubling=8, efficiency=91%, noil%=13. b) A Super lap former running with the following parameters. Find out the draft & production per shift in pounds. Assume that, No. of creel = 3, Winding speed = 125 yds/min, sliver hank is 0.12 Ne, Lap weight = 1100 grain /yd, Doubling = 11 cans/creel, Efficiency = 88%