Computer Architecture and Organization
CIS · Quiz · Summer 26
Paper 2 of 6Section C · Batch 24Switch
Section C · Batch 24
Paper 2 of 6
Read the questions as text
Read off the PDF by AI, so it may have mistakes. The PDF is the original.
Quiz Test 03 (Set A)
Student ID: ______________________
Student Name: __________________________________________________
Course Code: CIS131
Course Title: Computer Architecture and Organization
Semester: Summer 2026
Section: 24C
Date: 30.07.2026
Exam Duration: 20 mins
Marks: 15
1. Which register holds operands and results of ALU operations?
[ ] IR
[ ] ACC
[ ] MAR
[ ] PC
2. During which phase are MemRead, IRWrite, and PCWrite typically active?
[ ] Store
[ ] Execute
[ ] Decode
[ ] Fetch
3. What does "AMAT" stand for?
[ ] Average Memory Allocation Time
[ ] Average Memory Access Time
[ ] Average Miss Access Time
[ ] Average Memory Access Table
4. In a 1000-reference example, if L1 misses 40 times, what is the L1 Local Hit Rate?
[ ] 96%
[ ] 2%
[ ] 40%
[ ] 4%
5. What are the two types of logic elements in a datapath?
[ ] Static and Dynamic
[ ] Serial and Parallel
[ ] Combinational and State
[ ] Volatile and Non-volatile
6. The datapath and control unit together form what?
[ ] Compiler
[ ] Memory
[ ] Operating System
[ ] Processor
7. In direct-mapped cache placement, a block's location is determined by:
[ ] Memory Block number MOD number of sets in a cache
[ ] Memory Block number MOD number of cache blocks
[ ] Random assignment
[ ] Only in L1 cache
8. What is the first step in the Fetch phase?
[ ] MAR <- PC
[ ] IR <- MDR
[ ] PC <- PC+1
[ ] MDR <- Memory[MAR]
9. What technology is typically used for L1/L2/L3 cache?
[ ] DRAM
[ ] SRAM
[ ] Flash memory
[ ] Magnetic disk
10. What does "temporal locality" refer to?
[ ] Accessing nearby memory addresses
[ ] Accessing data sequentially
[ ] Reusing recently accessed data/instructions
[ ] Accessing data from disk
11. Which write policy updates both the cache and lower-level memory simultaneously on a write hit?
[ ] Write-Back
[ ] Write-Through
[ ] Write-Allocate
[ ] No-Write Allocate
12. Which replacement policy evicts the block that has not been used for the longest time?
[ ] FIFO
[ ] Random
[ ] Round Robin
[ ] LRU
13. Which level of the memory hierarchy sits closest to the processor?
[ ] CPU Registers
[ ] L1 Cache
[ ] Main Memory
[ ] Hard Disk
14. Which is an advantage of Hardwired Control Units?
[ ] Easy to modify after fabrication
[ ] Very fast, pure hardware, no lookup delay
[ ] Best suited for CISC ISAs
[ ] Requires control store
15. In Immediate addressing mode, where is the operand found?
[ ] Memory
[ ] Register
[ ] In the instruction itself
[ ] At an address stored in another register
Quiz Test 03 (Set B)
Student ID: ______________________
Student Name: __________________________________________________
Course Code: CIS131
Course Title: Computer Architecture and Organization
Semester: Summer 2026
Section: 24C
Date: 30.07.2026
Exam Duration: 20 mins
Marks: 15
1. What is the role of the MAR?
[ ] Holds the data fetched from memory
[ ] Holds the current instruction
[ ] Holds the address to read/write from memory
[ ] Holds ALU operation results
2. Which control signal triggers memory to output data?
[ ] MemWrite
[ ] IRWrite
[ ] RegWrite
[ ] MemRead
3. In direct-mapped cache placement, a block's location is determined by:
[ ] Memory Block number MOD number of sets in a cache
[ ] Memory Block number MOD number of cache blocks
[ ] Random assignment
[ ] Only in L1 cache
4. Which is the correct order of the single-cycle design stages?
[ ] Instruction Decode, Instruction Fetch, Execute, Register Fetch, Memory Access, Write Back
[ ] Instruction Fetch, Instruction Decode, Register Fetch, Execute, Memory Access, Write Back
[ ] Instruction Fetch, Instruction Decode, Memory Access, Register Fetch, Execute, Write Back
[ ] Register Fetch, Instruction Fetch, Instruction Decode, Execute, Write Back, Memory Access
5. The datapath and control unit together form what?
[ ] Compiler
[ ] Memory
[ ] Operating System
[ ] Processor
6. In a 1000-reference example, if L1 misses 40 times, what is the L1 Local Miss Rate?
[ ] 96%
[ ] 2%
[ ] 40%
[ ] 4%
7. Which level of the memory hierarchy sits closest to the processor?
[ ] CPU Registers
[ ] L1 Cache
[ ] Main Memory
[ ] Hard Disk
8. In the Fetch phase, which register change occurs last?
[ ] MAR <- PC
[ ] MDR <- Memory[MAR]
[ ] IR <- MDR
[ ] PC <- PC + 1
9. What technology is typically used for L1/L2/L3 cache?
[ ] DRAM
[ ] SRAM
[ ] Flash memory
[ ] Magnetic disk
10. What does "AMAT" stand for?
[ ] Average Memory Allocation Time
[ ] Average Memory Access Time
[ ] Average Miss Access Time
[ ] Average Memory Access Table
11. What does "spatial locality" refer to?
[ ] Accessing items whose addresses are close together
[ ] Reuse of the same data over time
[ ] Accessing random memory locations
[ ] Accessing registers only
12. In Immediate addressing mode, where is the operand found?
[ ] Memory
[ ] Register
[ ] In the instruction itself
[ ] At an address stored in another register
13. Which write policy on a write miss allocates a cache block before writing, and is typically paired with write-back caches?
[ ] No-Write Allocate
[ ] Write-Through
[ ] Write Allocate
[ ] Write-back
14. Which replacement policy evicts the block that has not been used for the longest time?
[ ] FIFO
[ ] Random
[ ] Round Robin
[ ] LRU
15. Which is an advantage of Hardwired Control Units?
[ ] Easy to modify after fabrication
[ ] Very fast, pure hardware, no lookup delay
[ ] Best suited for CISC ISAs
[ ] Requires control store