Water Supply Engineering
CE · Midterm · Fall 24
Section BN1, BN2
Read the questions as text
Read off the PDF by AI, so it may have mistakes. The PDF is the original.
Daffodil International University
BSc. In Civil Engineering
Midterm Examination, Fall - 2024
Course Code: CE 341
Course Title: Water Supply Engineering
Section: BN1, BN2
Level-Term: L3-T1
Teacher's Initial: MHz
Full Marks: 25
Date: 02-Oct-2024
Time: 1.5 Hours
Note: There are 5 questions. Answer all. [Right side figures indicate full marks]
1. Estimate the future population for the year 2045 of a city with the following data. Calculate the future demand if per capita water demand is taken as 120 lpcd. [5]
Year | 1990 | 2000 | 2010 | 2020
Population | 120,000 | 145,000 | 180,000 | 225,000
[Course Learning Outcome: CO1] [Cognitive Level: C5] [Time: 18 min]
2. A 0.2 m diameter tubewell produces 40,000 m^3/d from an unconfined aquifer. The static depth of water in the well is 42 m. An observation well at a distance of 120 m shows water level at 44.5 m. Calculate the coefficient of permeability. [5]
[Course Learning Outcome: CO3] [Cognitive Level: C4] [Time: 18 min]
3. A strainer with a diameter of 50 mm and length of 6 m is installed in an aquifer. The strainer have slot # 20 having an open area of 35%. If the entrance velocity of water from the aquifer to strainer is around 0.01 m/sec, what is the yield of the well? [5]
[Course Learning Outcome: CO3] [Cognitive Level: C4] [Time: 18 min]
4. The results of sieve analysis test carried out on a 250 gm sample of underground aquifer proposed to be tapped for installation of a tubewell, are given in the table below: [6]
Size of the sieve in mm | Wt. of material retained In gm | % of material retained | Cumulative % retained | % finer
(1) | (2) | (3) | (4) | (5)
2.360 (#8) | 0 | | |
1.180 (#16) | 2 | | |
0.600 (#30) | 15 | | |
0.300 (#50) | 170 | | |
0.150 (#100) | 30 | | |
0.075 (#200) | 20 | | |
pan | 13 | | |
Total = | 250 | | |
Determine the slot size (D60) of the tubewell.
[Course Learning Outcome: CO2] [Cognitive Level: C3] [Time: 21 min]
5. Determine the number and size of the intake gates for a flow of 200 MLD. [4]
[Course Learning Outcome: CO2] [Cognitive Level: C3] [Time: 15 min]
Required Formulae: (symbols have their usual meaning)
Q = (pi * K(y_2^2 - y_1^2)) / (log_e(r_2/r_1)) | Q = (2 * pi * K m (y_2 - y_1)) / (log_e(r_2/r_1)) | Q = pi * D * L * p * v_e | P_1 = P_e(1 + r)^n