Skip to content

Introduction to Robotics

SWE · Final · Summer 26

Paper 2 of 2Batch 42Switch

Batch 42

Paper 2 of 2

This browser can’t show the PDF here

Open it, and your phone’s PDF viewer takes it, or download it.

Read the questions as text

Read off the PDF by AI, so it may have mistakes. The PDF is the original.

Daffodil International University Faculty of Science & Information Technology Department of Software Engineering Final Examination, Summer 2026 Course Code: SE 532; Course Title: Introduction to Robotics Sections & Teachers: MTE (A, B), HI (C, D, J), SCS (E, F, G, H), FF(I) Time: 2:00 Hrs Marks: 40 Answer ALL Questions [The figures in the right margin indicate the full marks and corresponding course outcomes. All portions of each question must be answered sequentially.] 1. a) A point p(5,5,5)^T is attached to a rotating frame. The frame rotates 90 degrees about the z-axis of the reference frame. Compute the coordinates of the point relative to the reference frame after the rotation, and sketch the result graphically. | [Marks-5] | CLO-2 Level-3 1. b) A frame F_noa is located in the position P. After the following transformation the frame position has changed to Q[2,5,7]^T. A rotation along Z axis by anti-clock 30 degree but before that is a translation along all axis by [2,3,5]. After those two, another rotation along Y axis by 45 degrees followed by a translation along all axis by [3,-5,3]. Calculate the position P with respect to Q. | [Marks-10] | 1. c) An H-bridge is an electronic circuit made of four switches that lets a motor driver run a DC motor forward, backwards, and stop quickly. Sketch the H-bridge circuit and the truth table to describe its functionality. | [Marks-5] | 1. d) In a robotic arm system, there is one servo motor labelled as servo-1. Initially, servo-1 = 90 degrees. When the program starts, the robotic arm should perform the following sequence: Rotate servo-1 by 30 degrees, Wait for 2 seconds, Rotate servo-1 by 45 degrees, Wait for 2 seconds, Finally, return the servo motor to its initial positions. Build the circuit and code the Arduino program for this servo motor action. | [Marks-5] | 2. a) An agro-tech startup is deploying an Autonomous Crop Monitoring Rover to optimize large-scale farming efficiency. The rover operates independently in outdoor crop fields to navigate rows, monitor environmental conditions, and transmit data without human intervention. Rover Specifications & Features are: - Field Navigation: Moves through uneven crop rows using a motorized chassis. - Obstacle Avoidance: Detects and bypasses obstacles like rocks, animals, or fences. - Soil Monitoring: Identifies dry soil patches requiring immediate irrigation. - Weather Detection: Senses sudden rainfall to protect its electronics or alter behavior. - Data Transmission: Sends real-time field data wirelessly to a central farm dashboard. - Local Alerts: Activates a visual strobe and audible buzzer during critical events. - Power Management: Operates for extended periods using a battery and solar charging system. Collaborate the answers to the following questions in order to design this robot: i. List the components required to design this robot. ii. Draw and label the circuit diagram for this robot. iii. Describe the programming logic or code needed to make the robot detect dry soil and rainfall while also avoiding obstacles. | [Marks-10] | CLO-3 Level-5 2. b) In ROS, different parts of a robot can communicate with each other using nodes, topics, and messages. Explain these concepts with a simple example of a robot system. | [Marks-5] |