Skip to content

Numerical Methods

EEE · Final · Spring 26

Paper 2 of 2Section A, B, C, D · Mirza NafatullaSwitch

Section A, B, C, D

Paper 2 of 2

This browser can’t show the PDF here

Open it, and your phone’s PDF viewer takes it, or download it.

Read the questions as text

Read off the PDF by AI, so it may have mistakes. The PDF is the original.

Daffodil International University Department of Electrical and Electronic Engineering Faculty of Engineering Final Examination, Spring-2026 Course Code: 0541-213 Course Title: Numerical Methods Teacher's Initial: AKB, SP Section: A, B, C, D Level-Term: L2-T1 Time: 2 Hours Full Marks: 40 Exam Date: April 27, 2026 [Questions 1 and 2 are Mandatory. Answer any 3 of the remaining Questions. The second rightmost column indicates the COs (course learning outcomes of the course) with respective Bloom's level, and the rightmost column indicates the assigned marks.] Q1. A circuit is designed such that the total inductance L_eq is depended upon two of the inductances L_1 and L_2. The relation is L_eq = L_1 + 2L_2 + 5 / 2 + L_2. The current through the equivalent circuit is calculated by I = alpha(L_1 + L_2)^2; where alpha = 0.003 AH^-2 and the stored energy in the circuit is W = 1/2 L_eq I^2. L_1 and L_2 are related with each other and the following data table has been found: L_1(Henry) | 2 | 4 | 6 | 8 | 10 | 12 L_2(Henry) | 3.6 | 6.6 | 12.1 | 22.1 | 40.2 | 73.2 i) Using exponential curve fitting, determine the energy stored in the circuit for L_1 = 3 Henry. ii) If the actual value of the energy is 0.065 J, then determine the relative error and percentage error. Q2. Given that dy/dx = 4e^(0.8t) - 0.5y The initial condition at t = 0 is y = 2. i) Determine y from t = 0 to 4 with a step size of 1 using Euler's method ii) If the actual solution is: y = 4/1.3 (e^(0.8t) - e^(-0.5t)) + 2e^(-0.5t), then determine the relative error and percentage error. Q3. The total mass of a variable density rod is given by, m = integral_(0)^(L) d(x) A_c(x) dx where m = mass, d(x) = density, A_c(x) = cross-sectional area, x = distance along the rod and L = the total length of the rod. The following data have been measured for a 24 m length rod. x (m) | 0 | 4 | 8 | 12 | 16 | 20 | 24 d(x) (kgm^-3) | 4 | 3.95 | 3.80 | 3.60 | 3.41 | 3.30 | 3.10 A_c(x) (m^2) | 100 | 105 | 107 | 112 | 117 | 120 | 130 Determine the mass in Kilograms. Q4. In a Signal Processing Unit, a parameter named kappa is dependent on two hyper-parameters u and v. u and v both are dependent on time. u is defined by the equation: u(t) = C_0 e^(-alpha t). In a particular experiment, C_0 and alpha was 2 and 0.3 respectively. And the below chart was found: Time (t) | 0 | 3 | 6 | 9 | 12 v | 2 | 5 | 7 | 9 | 18 If kappa is a parameter and is defined by kappa(t) = d/dt (uv), then determine i) kappa(1) ii) kappa(7) Q5. A differential equation is defined by dy/dx = -xy^2, y(2) = 1 Using the Runge-Kutta method of order two with h = 0.1 for the initial problem, determine the value of y(2.3) Q6. A lossy communication channel is modeled by a second degree polynomial. The experimental data are given in the following table: X(m) | 0 | 1 | 2 | 3 | 4 | 5 Y(dB loss) | 2 | 8 | 14 | 27 | 41 | 61 i) Fit a second degree polynomial with the experimental data above. ii) Determine the Y (dB loss) for X = 1.5m with the polynomial