Skip to content

Energy Conversion I

EEE · Midterm · Spring 26

Section A/B/C/D

This browser can’t show the PDF here

Open it, and your phone’s PDF viewer takes it, or download it.

Read the questions as text

Read off the PDF by AI, so it may have mistakes. The PDF is the original.

Daffodil International University Department of Electrical and Electronic Engineering Faculty of Engineering Mid-Term Examination, Spring - 2026 Course Code: 0713-213 Course Title: Energy Conversion I Section: A/B/C/D Level-Term: L2-T1 Teacher's Initial: DRA / PA Full Marks: 25 Exam Date: February 22, 2026 Time: 1.5 Hours Attempt to Answer all 3 Questions Q1. a) Draw the phasor diagram of a capacitively loaded transformer with winding resistance and leakage reactance CO-1 [3] b) A 25 kVA, 2500/220 V, 50 Hz transformer has a high-voltage winding resistance of 0.15 ohm and a leakage reactance of 0.25 ohm. The low-voltage winding has a resistance of 0.04 ohm and a leakage reactance of 0.016 ohm. Find the equivalent winding resistance, reactance and impedance referred to the (i) high-voltage side and (ii) the low-voltage side and (iii) total Cu loss of the transformer. CO-1 [4] Q2. a) 'A transformer with magnetic leakage is equivalent to an ideal transformer with inductive coils connected in both primary and secondary side'- Justify this statement with necessary detailing. CO-1 [3] b) A 15 kVA, 450/150 V, 50 Hz transformer is connected to the high-voltage side while the low-voltage side remains open. The transformer draws 0.5 A of current and consumes a power of 25 W. Calculate (i) no-load pf angle and pf, (ii) the magnetizing current, (iii) core loss current. CO-1 [5] Q3. Answer any 2 (Two) from the following questions: a) The parameters of a 2200/230 V, 50-Hz transformer are given below: R_1 = 0.18 ohm; X_1 = 0.9 ohm; R_2 = 0.45 ohm; X_2 = 0.5 ohm; R_c = 235 ohm; X_m = 1250 ohm. The secondary load impedance Z = 0.55 + j 0.35 ohm. Solve for V_1, using the exact equivalent circuit with normal voltage applied across the primary. CO-2 [5] b) A 30 kVA, 2200/240 V, 50 Hz transformer has R_1 = 25 ohm, L_1 = 32 H, R_2 = 0.05 ohm, X_2 = 1.27 mH, no-load current of 5 A leading the flux by 25 degree and delivers full-load secondary current of 125 A at 200 V with a power factor of 0.85 lagging. Calculate (i) the supply voltage (ii) the overall power factor and (iii) draw the associated vector diagram. CO-2 [5] c) Obtain the equivalent circuit of a 230/400-V, 50-Hz, single-phase transformer from the following test data: O.C test: 230 V, 0.8 A, 60 W - on L.V. side S.C. test: 12 V, 10 A, 115 W - on H.V. side Calculate the secondary terminal voltage when delivering 5 kW at pf 0.85 lagging, the primary voltage being 230V. CO-2 [5]