Skip to content

Electrical Circuits II

EEE · Final · Fall 25

Section A, B, C, D

This browser can’t show the PDF here

Open it, and your phone’s PDF viewer takes it, or download it.

Read the questions as text

Read off the PDF by AI, so it may have mistakes. The PDF is the original.

Daffodil International University Department of Electrical and Electronic Engineering Faculty of Engineering Final Examination, Fall 2025 Course Code: 0713-121 Course Title: Electrical Circuits II Teacher's Initial: MSA, SZE Section: A, B, C, D Level-Term: L1-T2 Time: 2 Hours Full Marks: 40 Exam Date: December 14, 2025 Questions No. 1 and 2 are COMPULSORY. Answer any 3 (THREE) from the rest of the Questions Q1. (a) Distinguish between the frequency response of a BPF and BSF circuit, labeling the graphs properly. [CO-3 C(4) = 08] (b) Explain mathematically what type of filter the circuit in Figure 1(b) works as. Illustrate the actual and ideal frequency response of the corresponding filter. [Figure: RC circuit with an inductor in parallel and a resistor in series] Q2. (a) Deduce the relation of half-power frequencies with circuit elements (R, L, C) of an RLC series resonance circuit. [CO-3 C(4) = 08] (b) The Quality factor of a band-pass filter circuit is 50. If the resonant frequency of the circuit is 5 krds^-1, calculate the Bandwidth of the circuit. Also, illustrate the circuit with appropriate values of R and C if L = 0.1 H. Q3. (a) Show that in a balanced Y-Y circuit, In = 0. [CO-2 C(3) = 02+02+04 = 08] (b) Illustrate the phasor diagram of the Line and Phase voltages of a Y-connected source. (c) Calculate Vx of the circuit in Figure 3(b) using nodal analysis. [Figure: AC circuit with independent voltage and current sources, resistors, and inductors] Q4. Calculate the line currents of the load of the 3-phase unbalanced circuit given in Figure 4. The circuit is operating in abc sequence Van = 120∠45° V. Show that the total complex power supplied by the source equals the total complex power of the load. [CO-2 C(3) = 05+03 = 08] [Figure: 3-phase unbalanced star-connected load with impedance branches] Q5. (a) Explain your understanding of Kirchhoff's Voltage Law (KVL) with a suitable example. [CO-2 C(3) = 02+06 = 08] (b) Compute io of the circuit in Figure 5(b). [Figure: AC circuit with independent voltage and current sources, resistors, capacitor, and inductor] Q6. (a) In a balanced Δ-Y circuit, Vab = 110 V. The per-phase impedance, Zy = (10 + j5) Ω. Compute the line voltages, line currents, total power, and power factor of the system if the circuit operates in acb sequence. [CO-2 C(3) = 04+04 = 08] (b) A three-phase wye-connected motor takes 10 kVA at 0.8 power factor lagging from a source of 120V. It is in parallel with a balanced delta load having 12 - j8 Ω impedance per phase. Calculate the equivalent impedance per phase, line currents, and power factor of the combination. Q7. (a) A 5-horsepower, 220V, three-phase motor has an efficiency of 70 percent and operates with a line current of 15 A. Compute the power factor at which the motor is operated. [CO-2 C(3) = 02+06 = 08] (b) Use Mesh Analysis to compute the current Io flowing in the circuit in Figure 7. [Figure: AC circuit with independent voltage and current sources, resistors, and mutual inductance]