Skip to content

Energy Conversion I

EEE · Final · Summer 26

Paper 1 of 6By Debdash Chakroborty MounaSwitch

Paper 1 of 6

This browser can’t show the PDF here

Open it, and your phone’s PDF viewer takes it, or download it.

Read the questions as text

Read off the PDF by AI, so it may have mistakes. The PDF is the original.

Daffodil International University Department of Electrical and Electronic Engineering Faculty of Engineering Final-Term Examination, Summer - 2026 Course Code: 0713-213 Course Title: Energy Conversion I Section: A/B/C/D/E/F/G Level-Term: L2-T1 Teacher's Initial: DRA / PA / RS All Marks: 40 Exam Date: August 19, 2026 Time: 2.0 Hours Attempt to Answer all 4 Questions Q1. a) Explain the production of a rotating magnetic field in a two-phase supply using vector diagram of flux. [4] b) The rotor resistance and reactance per phase of a 4-pole, 50-Hz, 3-phase induction motor are 0.025 ̉ and 0.12 ̉, respectively. The full-load slip is 5%. Find the additional rotor resistance per phase that must be inserted so that the starting torque is equal to one-half of the full-load torque. [4] Q2. a) Prove the condition for maximum full-load torque and hence determine the maximum full-load torque. CO-2 [3] C(2) b) A 746-kW, 3-phase, 50-Hz, 16-pole induction motor has a rotor impedance of (0.02+j0.15)̉ at standstill. The full-load torque is obtained at 360 rpm. Calculate: CO-2 [6] C(4) i. The ratio of maximum torque to full-load torque. ii. The speed at maximum torque. iii. The rotor resistance to be added to obtain maximum starting torque. Q3. a) Show the condition for maximum efficiency of a transformer and determine the output current at which maximum efficiency occurs. CO-2 [3] C(2) b) A 50-kVA, 2200/220-V, single-phase transformer has a full-load copper loss of 800 W and an iron (core) loss of 500 W. The transformer operates at a power factor of 0.8 lagging. Calculate: CO-2 [6] C(4) i. The output current at which maximum efficiency occurs. ii. The maximum efficiency of the transformer at 0.8 power factor. iii. The efficiency of the transformer at half-load and 0.8 power factor. P. T. O Q4. Answer any 2 (Two) from the following 4 questions: a) A 220-V, 3-phase, 4-pole, 50-Hz, Y-connected induction motor is rated 3.73 kW. The equivalent circuit parameters are: R1 = 0.5 ̉; X1 = 0.9 ̉; R'2 = 0.8 ̉; X'2 = 1.25 ̉; Xm = 30 ̉. The stator core loss is 50 W and rotational loss is 150 W. For a slip of 0.04, find: (i) Input current, (ii) Power factor, (iii) Air-gap power, (iv) Mechanical power, (v) Output power, and (vi) Efficiency. CO-3 [7] C(5) b) A 3-phase, 400-V, Y-connected induction motor has an equivalent T-circuit consisting of: R1 = 1 ̉, X1 = 2 ̉. Equivalent rotor values: R'2 = 1.2 ̉, X'2 = 1.5 ̉. The exciting branch has an impedance of (4 + j40) ̉. Assume friction loss to be 250 W. If the slip is 5%, find: (i) Input current, (ii) Power factor, (iii) Output power, and (iv) Efficiency CO-3 [7] C(5) c) Two 100-kW transformers each have a maximum efficiency of 98%, but in one transformer the maximum efficiency occurs at full-load, while in the other it occurs at half-load. Each transformer is on full-load for 4 hours, on half-load for 6 hours, and on one-tenth load for 14 hours per day. Determine the all-day efficiency of each transformer. CO-3 [7] C(5) d) A 5 kVA, 220/400-V, single-phase transformer has equivalent resistance and reactance referred to LV side equal to 1.0 ̉ and 1.5 ̉ respectively. Find the terminal voltage on the HV side when it supplies 3/4th full-load at power factor of 0.8, the supply voltage being 220V. Hence, find the output of the transformer and its efficiency if the core losses are 130 W. CO-3 [7] C(5)