Electrical Circuits
CSE · Final · Spring 24
Batch 65
Read the questions as text
Read off the PDF by AI, so it may have mistakes. The PDF is the original.
Daffodil International University
Faculty of Science & Information Technology
Department of Computer Science and Engineering
Final Examination, Spring-2024
Course Code: CSE121
Course Title: Electrical Circuits
Level: 1
Term: 2
Batch: 65
Time: 2 Hours
Full Marks: 40
[The figures in the right margin indicate the full marks and corresponding course outcomes. All portions of each question must be answered sequentially.]
Q1. a) Explain the concept of super node. | 5x2=10 | CO1
b) Illustrate the periodic waveform of sinusoidal voltage with peak amplitude and peak-to-peak value.
c) Compare the phasor diagram and impedance diagram for the series circuit.
d) Interpret the power factor of inductive network.
e) Show the complex conjugate of a complex number in rectangular form.
Q2. a) Solve the equivalent resistance and the value of the current through 10.4 kΩ of the following circuit. | 6x2=12 | CO2
[Figure: A DC circuit with a 28V voltage source connected in parallel to a 12 kΩ resistor, a parallel combination of 12 kΩ and 3 kΩ resistors, and a series branch containing a parallel combination of 9 kΩ and 6 kΩ resistors in series with a 10.4 kΩ resistor.]
b) Apply nodal analysis to determine the voltage across 2 Ω resistance in the following circuit.
[Figure: A circuit with a 20V voltage source, a 4 Ω resistor, a 5A current source, a 2 Ω resistor, a 4 Ω resistor, and a 16V voltage source.]
Q3. a) Simplify the following equation to determine the effective values of the waveforms followed by I-V plot and also the average power loss of the circuit whose input current and voltage are as follows: | 6x3=18 | CO3
i. i = 7sin(377t - 70°)
ii. v = 263.9sin(377t + 20°)
b) The current through a 0.2 H coil is provided.
i = 8.5sin(377t - 55°)
Now Simplify the following equation to find:
i. The sinusoidal expression for the voltage.
ii. Sketch the v and i curves.
iii. Power factor of the v and i and indicate they are leading or lagging.
c) Examine the following R-L circuit to determine the ZT, I, VR, VL, PT followed by phasor diagram:
[Figure: An AC circuit with a sinusoidal voltage source e = 141.4 sin wt connected in series with a resistor R = 5 Ω and an inductor XL = 8 Ω.]