Electrical Circuits
CSE · Midterm · Spring 24
Batch 65
Read the questions as text
Read off the PDF by AI, so it may have mistakes. The PDF is the original.
Daffodil International University
Faculty of Science & Information Technology
Department of Computer Science and Engineering
Midterm Examination, Spring-2024
Course Code: CSE121, Course Title: Electrical Circuits
Level: 1 Term: 2 Batch: 65
Time: 1 Hour and 30 Minutes
Marks: 25
[The figures in the right margin indicate the full marks and corresponding course outcomes. All portions of each question must be answered sequentially.]
Answer ALL Questions
1. a) Define the term 'Conductance' in an electric circuit. | 5x1=5 | CO1
b) Show the difference between an open and short circuit. | |
c) Illustrate the Norton equivalent circuit. | |
d) Recall some applications of the maximum power transfer theorem. | |
e) Show the peak-to-peak voltage of a sinusoidal wave using a graphical representation. | |
2. a) Relate that maximum power is transferred to the load when the load resistance equals the Thevenin resistance of the network. | 2x5=10 | CO2
b) Solve the following circuit to determine the total resistance Req: | |
[Figure: A circuit diagram with Req connected to terminals, containing 10 ohm, 12 ohm, 48 ohm, 34 ohm, 12 ohm, 18 ohm, 7 ohm, and 17 ohm resistors in a bridge-like and series-parallel combination.]
3. a) Analyze the following circuit to determine the mesh currents using mesh analysis, and the value of current through the 7 ́̈̀̄̇̈̂̄ ̇ resistor. | 2x5=10 | CO3
[Figure: A multi-mesh circuit with a 7V source, a 5 ohm resistor, a 3 ohm resistor, a 1 ohm resistor, a 10 ohm resistor, a 7 ohm resistor, a 5V source, and an 8V source.]
b) Examine the following circuit to determine the current through the 10 ́̈̀̄̇̈̂̄ ̇ resistor using the superposition theorem. | |
[Figure: A circuit with E1=45 V, a 50 ohm resistor, a 10 ohm resistor, a 20 ohm resistor, and E2=52 V.]